Home > Products > load cell and accessories > Weighing Controller and indicator >

INA2PS Amplifier Weight Transmitter Load cell for weighing conversion

INA2PS Amplifier Weight Transmitter Load cell for weighing conversion

INA2PS Amplifier Weight Transmitter Load cell for weighing conversion
CategoriesWeighing Controller and indicator
AlbumView larger image
BrandInntronic
ModelIN-A2PS
CatagoriesWeighing accessories
Delivery time7-15 work days
OriginalChina
PriceNegotiation
Accuracy1/10000
FOB portSHANGHAI
Terms of PaymentL/C, T/T
Update Time2020-11-25
Detail Information

Load cell amplifier/Weight transmitter IN-A2PS

weight transmitter



 


This Load cell amplifier/Weight transmitter Built-in 24 bits Σ-Δ integrated ADC chip for weighing conversion;
Full digital conversion, no potentiometer or any other analog conditioning components;
Analog output two-button calibration, it only needs calibrate once of zero and full.


1 Accuracy: 1/10000
2 Non-linearity: ≤0.008%F.S
3 Zero temperature drift: ≤0.4μV/℃
4 Temperature coefficient of span: ≤10ppm/℃
5 Net input range of full capacity: -30 mV ~ +30mV
6 Sensitivity of analog input signal: 0.5uV /d (Min.)
1.5uV/d (Recommend)
7 Calibration range: +- 50%FS
8 Display: No display
9 Working temperature: -30℃~ 60℃
10 Relative humidity: ≤ 90%(No condensation)
11 Power supply: +18 ~ +26VDC,>0.5A
12Load cell bridge voltage: DC 5V 1.5A Can max connect with 8 pieces of load cells whose impedance > 350Ω
13 Output optional: 0~5V,0~10V,4~20mA(DIP switch selection)



Load cell amplifier/Weight transmitter Wiring:


+E: load cell power supply +
-E: load cell power supply -
GND: shield
+S: feedback signal +
-S: Feedback signal -

Share Beam Load Cell


  • NCI Mark V Load Cell
  • Sensortronics 60048SS Load Cell
  • Weigh-Tronix Mark V Load Cell

Share Beam Load Cell



Share Beam Load Cell


Capacities

25LB, 50LB, 100LB, 200LB, 400LB, 500LB, 1K LB

Rated Output

2.0 mV/V

Safe Overload

150%FS

Excitation Voltage

10-20V AC/DC

Input Resistance

385 ± 10 OHMS

Output Resistance

350 ± 3 OHMS

Zero Balance

±1.00%FS

Seal Type

Environmentally sealed, potted IP67

Non-linearity

±0.03%FS

Hysteresis

±0.02%FS

Repeatablity

±0.02%FS

Creep

±0.03%FS

Compensated Temperature Range:

-10 - +40

Temperature Effect on Zero

±0.02%FS/

Temperature Effect on Output

±0.001%FS/

Insulation Resistance

>5000 MEGOHMS

Load Cell Cable

4 Conductor, 10 FT

Load Cell Wiring

Green +EXC

Black –EXC

White +SIG

RED  -SIG

Braid/Yellow: Shield

 

Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service