ST018 125 750 Nm torque sensor for Static Torque Test

Detail Information

Static Torque Test, Torque Wrench Test Load Cell

Items	UNIT	TECHNICAL DATA
Rated capacities(Emax)	N.m	125, 750
Sensitivity	mV/V	1.0±2.0
Total error	F.S	±0.5;±1%
Creep error(30min)	F.S	±0.1%
Zero balance	F.S	±1%
TCO	F.S/℃	±0.03% / 10
TC SPAN	F.S/℃	±0.03% / 10
Input impedance	Ω	400±20
Output impedance	Ω	352±3
Insulation impedance	MΩ	≥5000
Temperature range, operating	℃	-30~ +70
Maximum safe overload	F.S	120%
Ultimate overload	F.S	180%
Excitation, recommend	V	10-12V DC
Excitation, maximum	V	15V DC
Protection class		IP67
Construction		Alloy steel
Cable	m	Length: 5
Cable	mm	Diameter: φ5
Wiring		Exc+(Red) Exc-(Black) Sig+(Green) Sig-(White)

Capacities	25LB, 50LB, 100LB, 200LB, 400LB, 500LB, 1K LB
Rated Output	2.0 mV/V
Safe Overload	150%FS
Excitation Voltage	10-20V AC/DC
Input Resistance	385 ± 10 OHMS
Output Resistance	350 ± 3 OHMS
Zero Balance	±1.00%FS
Seal Type	Environmentally sealed, potted IP67
Non-linearity	±0.03%FS
Hysteresis	±0.02%FS
Repeatablity	±0.02%FS
Creep	±0.03%FS
Compensated Temperature Range:	-10℃ - +40℃
Temperature Effect on Zero	±0.02%FS/℃
Temperature Effect on Output	±0.001%FS/℃
Insulation Resistance	>5000 MEGOHMS
Load Cell Cable	4 Conductor, 10 FT
Load Cell Wiring	Green +EXC Black –EXC White +SIG RED -SIG Braid/Yellow: Shield