Home > Products > Force and pressure Sensor and controller > Force sensor >

IN-650D force controller For Batch Scale&Dosing Scale

IN-650D force controller For Batch Scale&Dosing Scale

IN-650D force controller For Batch Scale&Dosing Scale
CategoriesForce sensor
AlbumView larger image
BrandInntronic
ModelIN-650D
Catagoriesforce controller
Delivery time7-15 work days
OriginalChina
Analog output4~20mA
Interchangeable withINDICATOR OF PT650D
Non-linearity≤0.005%F.S
Zero drift≤0.2μV/℃
Zeroing range100%FS
Power supply+18 ~ +24 VDC,0.5A
FOB portSHANGHAI
Terms of PaymentL/C, T/T, Paypal
Update Time2018-12-11
Detail Information

force controller For Batch Scale&Dosing Scale IN-650D


Interchangeable with 

INDICATOR OF PT650D



force controller Especially for batching scale


force controller main features:

¨ The panel keyboard is available for setting parameters and calibration span.

¨ Functions of displaying weight and zero setting

¨ Reminding for instrument failure and errors in operation

¨ 4~20mA analog output,it is available to set the corresponding weight of current output of 

   0mA and 20mA.

¨ The fixed value of low,median and high can control output and be available to set respective 

control value and buffer value arbitrarily.

¨ RS232 output

-weighing indicator Especially for batching scale

force controller Main Technical Parameters

¨ 2.1 A/D sampling rate:  7.5 Times/s~240Times/s optional

¨ 2.2 Internal resolution:  24bits

¨ 2.3 Non-linearity:  ≤0.005%F.S

¨ 2.4 Zero drift:  ≤0.2μV/℃

¨ 2.5 Temperature coefficient of capacity:   ≤10ppm/℃

¨ 2.6 Net input signal range of full capacity:   2~20mV

¨ 2.7 Initial weight signal range: -1~+9mV

¨ 2.8 Analog input signal sensitivity:0.5uV /d(Minimum)

          1.5uV/d(Recommended)

¨ 2.9 Zeroing range: 100%FS

¨ 2.11 Display: 6 red LED digital tubes(height of word is 14mm

¨ 2.14 Amibent temperature of operation: -5℃~ 45℃

¨ 2.15 Relative humidity: ≯ 90%(Non condensing)

¨ 2.16 Power supply: +18 ~ +24 VDC,0.5A

2.17 Sensor bridge excitation: DC 5V,avaiable to connect 4 load cells of 350 ohms or 12 load cells of 750 ohms.    

Installation Dimension

Front panel dimension for weighing indicator of IN650D


Back panel size for weighing indicator of IN650D

Location map of back panel socket for weighing indicator of IN650D


Share Beam Load Cell


  • NCI Mark V Load Cell
  • Sensortronics 60048SS Load Cell
  • Weigh-Tronix Mark V Load Cell

Share Beam Load Cell



Share Beam Load Cell


Capacities

25LB, 50LB, 100LB, 200LB, 400LB, 500LB, 1K LB

Rated Output

2.0 mV/V

Safe Overload

150%FS

Excitation Voltage

10-20V AC/DC

Input Resistance

385 ± 10 OHMS

Output Resistance

350 ± 3 OHMS

Zero Balance

±1.00%FS

Seal Type

Environmentally sealed, potted IP67

Non-linearity

±0.03%FS

Hysteresis

±0.02%FS

Repeatablity

±0.02%FS

Creep

±0.03%FS

Compensated Temperature Range:

-10 - +40

Temperature Effect on Zero

±0.02%FS/

Temperature Effect on Output

±0.001%FS/

Insulation Resistance

>5000 MEGOHMS

Load Cell Cable

4 Conductor, 10 FT

Load Cell Wiring

Green +EXC

Black –EXC

White +SIG

RED  -SIG

Braid/Yellow: Shield

 

Please send your message to us
*We will reply your inquiry to this Email as soon as we see it