Full Digital Conversion Load Cell Transmitter Analog Output Two - Button Calibration
Full Digital Conversion Load Cell Transmitter Analog Output Two - Button Calibration

Categories | Weighing Controller and indicator |
---|---|
Album | View larger image |
Brand | Inntronic |
Model | INA2PS |
accuracy | 1/10000 |
Non-linearity | ≤0.008%F.S |
Zero te℃mperature drift | ≤0.4μV/℃ |
Temperature coefficient of span | ≤10ppm/℃ |
Net input range of full capacity | -30 mV ~ +30mV |
Sensitivity of analog input signal | 0.5uV /d (Min.)1.5uV/d (Recommend) |
Calibration range | +- 50%FS |
Output optional | 0~5V,0~10V,4~20mA(DIP switch selection) |
Update Time | 2021-03-01 |
INA2PS 0-10V 4-20MA weight transmitter amplifier for batching scale silo scale Net input range of full capacity: -30 mV ~ +30mV
- This Load cell amplifier/Weight transmitter Built-in 24 bits Σ-Δ integrated ADC chip for weighing conversion;
- Full digital conversion, no potentiometer or any other analog conditioning components;
- Analog output two-button calibration, it only needs calibrate once of zero and full.
1. Accuracy: 1/10000
2 . Non-linearity: ≤0.008%F.S
3 . Zero temperature drift: ≤0.4μV/℃
4 . Temperature coefficient of span: ≤10ppm/℃
5 . Net input range of full capacity: -30 mV ~ +30mV
6 . Sensitivity of analog input signal: 0.5uV /d (Min.)
1.5uV/d (Recommend)
7. Calibration range: +- 50%FS
8 . Display: No display
9 . Working temperature: -30℃~ 60℃
10 . Relative humidity: ≤ 90%(No condensation)
11 . Power supply: +18 ~ +26VDC,>0.5A
12. Load cell bridge voltage: DC 5V 1.5A Can max connect with 8 pieces of load cells whose impedance > 350Ω
13 . Output optional: 0~5V,0~10V,4~20mA(DIP switch selection)
Load cell amplifier/Weight transmitter Wiring:
- +E: load cell power supply +
- -E: load cell power supply -
- GND: shield
- +S: feedback signal +
- -S: Feedback signal -